Frequency intercommunity

 Frequency range

0.5Hz ~ 3MHz，With five digits LED display，Maximum resolution 0.001Hz，it is divided into six file, and use the rotary switch to selection

Input waveform

Totally have six waveform: Oblique wave, triangle wave, sine wave, square wave, is pulse wave and negative pulse. knobbing switch can directly choose output

stability

0.1%-In the boot after 15 minutes. 0.2%-In the boot after 24 hours

Dc offset
   (DC OFFSET)

Continuous variable、 switch isolation dc; Maximum range + - 10V(unloaded)， + - 5V(50Ωload)

Oblique wave

 Frequency range

0.5Hz ~ 2.5MHz，With five digits LED display

 Maximum resolution

0.001Hz

Symmetry proportion

Compare with 15%( Decline range) ,the 85%( Up band)＜5%(1Hz ~ 100KHz)

 Rising wave linear

＜1%(1Hz ~ 100KHz)

Triangular wave

Frequency range

0.5Hz ~ 3MHz，With five digits LED display

Maximum resolution

0.001Hz

Symmetry proportion

Compare with 15%( Decline range) ,the 50%( Up band)＜5%(1Hz ~ 100KHz)

 Linear

＜1%(1Hz ~ 100KHz)

sine wave. 

Frequency range

0.5Hz ~ 3MHz，With five digits LED display

Maximum resolution

0.001Hz

 symmetry

Compare with 50%( Decline range) ,the 50%( Up band)＜5%(1Hz ~ 100KHz)

 distortion

＜1% to 100KHz

Harmonic proportion

＜30dB to 3MHz

 Frequency response

＜0.1dB to 100MHz   ＜1dB to 3MHz

Square wave

Frequency range

0.5Hz ~ 3MHz，With five digits LED display

Maximum resolution

0.001Hz

 symmetry

 Compare with 50%( Negative half cycle) ,the 50%( The positive half cycle)error＜1% to 100KHz

Rise time

＜60nS

Is pulse wave

Frequency range

0.5Hz ~ 2.5MHz，With five digits LED display

Maximum resolution

0.001Hz

 Is pulse width

0.4sec ~ 100nS(Continuous adjustable)

symmetry

Compare with 85%( Negative baseline),the 15%( Is pulse wave)error 5% to 100KHz

 Rise time

＜60nS

Negative pulse wave

Frequency range

0.5Hz ~ 2.5MHz，With five digits LED display

Maximum resolution

0.001Hz

Negative pulse width

0.4sec~100nS

Symmetry

Compare with 15%( Negative pulse wave) ,the 85%( Is base)error＜5% to100KHz

 fall time 

＜60nS

 Main output end

Output impedance

50Ω，error＜2%

Max output

20Vp-p(Unloaded )，0.05Vp-p(50Ωload)  error： + - 0.5V

Min output

0.1Vp-p(unloaded)，0.05Vp-p(50Ωload)

 attenuator

-20dB An Attenuation switch  ; Attenuation error:＜2%

Synchronous output end

 Output level

TTL level，＞3Vp-p Fixed amplitude

Fan three-dimensional

＞20

Rise time

＜30nS

VCF input

Input level

0~10V Voltage input

 Maximum frequency change guy

1 : 1 ~ 1 : 1000

 Input frequency

DC ~ 1KHz

Scanning synchronous output end

 Output resistance

1KΩ，error＜2%

 Output waveform

LINEAR or LOG scan Oblique wave

Output amplitude

10Vp-p(unloaded)，5Vp-p(51KΩload)

output frequency

Continuous variable，0.2Hz ~ 100Hz

Scanning generator

 scan mode

 LINEAR/ LOG scan ，With switch

  scan rate

5sec ~ 10mS，Continuous variable

 run length

1 : 1 ~ 1 : 100(with frequency control to use)

general characteristic

 Operating environment

 temperature:0 ~ 40  ;  humidity 0 ~ 90%

 Operating Voltage

AC 115V(+-10%) 50/60Hz , FUSE 600mA。
AC 230V (+-10%) 50/60Hz , FUSE 300mA

 Consumed power

Max 25VA(W)

Scattered heat

Dedicated heat removal fan DC 12V/100mA

Security certification

CE,GS,UL,CUL (Inspection qualified)

size

275mm(width) x 90mm(Height) x 300mm( depth)

weight

2.5Kg(Net)

Attached

specification，Power cord